Fig. 30 Adjusting rings on the paper brake
Fig. 31 Adjusting rings on the deflection shaft of the
cutting edge
–
Align the adjusting rings (1) on the paper control unit/paper brake (2) and fix with
suitable tools.
–
Align the adjusting rings (3) on the deflection shaft of the cutting edge and fix with
suitable tools.
NOTE
When aligning and fixing the adjusting rings, it must be ensured that
the paper is not compressed or kinked!
Operating instructions Interleaver
0036
The adjusting rings on the paper control
unit/paper brake and on the deflection shaft
of the cutting edge are used as additional
guide assistance.
These must also be fixed using a suitable
tool after paper alignment.
Operation
36