7.2.4
Closing the housing cover
Fig. 38 Closing the housing cover
–
Place the housing cover (1) on and lock the hygiene screws (2) by turning to the right.
–
Assemble the portioning and control belt and retract the CCU.
(see operating instructions of the slicer)
NOTE
When assembling in the cutting area of the slicer, urgently observe the safety
information in the operating instructions!
Fig. 39 Interleaver unit
–
Push the interleaver unit (1) into the interleaver housing until the locking bolt (2) engages
audibly.
–
Close the door (3) of the interleaver housing.
Operating instructions Interleaver
0041
Before
commissioning
housing cover of the interleaver must be
closed again
Insert
the
interleaver
interleaver housing and close the door of
the interleaver housing.
Operation
the
line,
the
unit
into
the
41