Safety Data Sheet - Weber CCI 303 Operating Instructions Manual

2.2 Safety data sheet

NOTE
The following safety instructions must be observed when operating,
cleaning, and maintaining the interleaver.
Before installation, commissioning, operation, cleaning and maintenance of the
1.
interleaver, the entire operating instructions must be read. The operating instructions
must be precisely observed in all points. The supervisor must ensure that the operator
has read and understood the operating instructions.
Every working day before commissioning, the operator must check the functionality
2.
of all safety equipment relevant for operation of the interleaver. Check electrical
connections for damage and tight fit.
The operator must report defects to the safety equipment or electrical connections
3.
immediately to the supervisor.
The supervisor must ensure that defective safety equipment is replaced or repaired
4.
immediately. The supervisor must provide work instructions for safe operation.
The interleaver may only be properly operated, cleaned and maintained by trained
5.
personnel. Regular follow-up training, e. g. for operation, cleaning and maintenance is
required. The accident prevention regulation (according to VBG 20) must be part of
the training contents.
The cleaning method described in the cleaning instructions must be observed. The
6.
supervisor must provide work instructions for safe cleaning work.
The maintenance work described in the maintenance instructions must be observed.
7.
The supervisor must provide work instructions for safe maintenance work.
Safety equipment must be checked for proper function at least once a year by a
8.
qualified person.
The interleaver must not be modified.
9.
Only WEBER spare parts and WEBER accessories may be used.
10.
The entire operating instructions must accompany the interleaver when it is resold.
11.
Operating instructions Interleaver
0008
Safety
8