Replacing/Exchanging A Used Paper Roll - Weber CCI 303 Operating Instructions Manual

7.2.3

Replacing/exchanging a used paper roll

Fig. 33 Quick-release device
– Open the pressure valve (1) on the quick-release device (2) by pressing and release the
compressed air.
– Cut the still threaded paper on the old paper roll off and leave it in the interleaver
– Remove old paper roll forwards
– Insert a new paper roll
NOTE
When inserting the new paper roll, it must be ensured that the paper
conveyance is done in a "clockwise" direction (by turning to the right)!
Fig. 34 Direction of rotation of the paper conveyance
Operating instructions Interleaver
0038
When exchanging or inserting a new paper
roll, the air pressure from the quick-release
device must be relieved at the roller mount.
To do this, press the pressure valve slightly
with a firm object or your finger.
The clamping pins are therefore no longer
under pressure and the paper roll can be
easily removed or repositioned.
Since the paper conveyance takes place in a
specified direction of rotation, the paper roll
must be placed on the quick-release device as
shown in the adjacent figure.
Operation
38