Krick Sea Cruiser ARIADNE Building Instructions page 74

Then insert the mainsail into the mast from
above.
Fasten the boom to the bracket with a screw
M4 * 15 pos. 168 and a stop nut pos. 113.
Now you can attach the backstay for the rear
tensioning of the mast.
To do this, insert a bent bracket with 2 screws
and nut M 2 into the keep at the mast top
again.
Status July 2019
Hang a shroud tensioner into the eye bolt at
the rear.
Now you can fix the backstay between mast
top and shroud tensioner.
Page 31 ©
Krick Modelltechnik Knittlingen Germany