Screw the engine firmly into the mount and
fasten the coupling and shaft on to the engine.
Use an adjusting ring (propulsion set 42370
item 9+10) and the lubricating nipple to lubri-
cate the shaft.
Status July 2019
Slide the collar onto the top end of the stern
tube and clamp it tightly on the grub screw on
the shaft using the lubricating nipple.
Now stick the collar and lubricating nipple onto
the shaft with super glue.
Now use the guide of the lubricating nipple and
drill through the stern tube.
Page 6
©
Krick Modelltechnik Knittlingen Germany