Krick Sea Cruiser ARIADNE Building Instructions page 71

Cut off the corner at the mainsail neck.
The next step is to attach the sail battens to
the mainsail. You will need the sail battens
pos. 141 and the adhesive tape pos. 142
Stick the sail batten in the centre of the tape.
Mark the position of the 4 sail battens at a
distance of 200 mm from the bottom leech so
that the battens are at 90° to the rear leech.
Status July 2019
142
141
Kopf
Page 28
Stick the sail battens on like this.
Now the mast slides are still to be attached. To
do this, cut the slotted plastic tube pos. 143
into pieces of approx. 15 mm length.
©
Krick Modelltechnik Knittlingen Germany