Krick Sea Cruiser ARIADNE Building Instructions page 58

Round off the rear edge slightly.
Now stain the frame part 80 and glue it onto
the cockpit.
With the last step the woodwork on the cockpit
is finished. Glue the two brackets part 81 for
the traveller to the sides of the cockpit.
Status July 2019
The next step is to tape the coaming edges of
the wheelhouse with tape film as protection,
because the parts are not glued to the coaming
edge. Also tape the deck accordingly with tape.
Start with parts 47 to 49.
80
Glue together the base frame from parts 47
and 48.
Page 15
81
48
47
49 47
48
©
Krick Modelltechnik Knittlingen Germany