Krick Sea Cruiser ARIADNE Building Instructions page 62

Now would also be the right time to prime and
varnish the deck.
The next step is to paint the fuselage. To do
this, align the model in the stand so that the
nose tip is 33 cm high. Mark the waterline with
a waterline marker set at 24.5 cm height plus
the thickness of the foam material on the
stand. You can now mask the waterline with
suitable tape and paint it.
Status July 2019
The window frames on the body can be found
on the brass etched parts plate.
Stick the windows to the marked positions.
Also glue the portholes to the rear wall of the
superstructure. Stain the superstructure door
part 62, prime with pore filler and varnish. It
can then be glued to the structure.
Page 19
82
150 62
©
Krick Modelltechnik Knittlingen Germany