Krick Sea Cruiser ARIADNE Building Instructions page 55

Now at the front attach the ends of the side
panels to the doubled companionway with
superglue.
Proceed in the same way with the end of the
cockpit backrest. Fix the end with superglue.
Align its course with the course of the planking.
54
In the next step, glue the doublings 53 and 54
inside. Also apply a bead of glue to the bottom
edge.
Status July 2019
Make the bases for the winches from 4 parts
88 each.
Adapt the bases on the hull and cockpit rear
side.
The bases can now be stained and then
primed with pore filler. When dry, glue them to
both sides of the cockpit rear side.
53
Now cover the joint between the superstructure
side and deck with the strip 2 * 2 mm, part 83.
Page 12
88
©
Krick Modelltechnik Knittlingen Germany