Krick Sea Cruiser ARIADNE Building Instructions page 51

2
Now clip the support boards 38 and 39 on the
servo board and align it 5 cm below the sup-
port boards.
When the position is correct, the support bars
can be affixed in the hull, without sticking to-
gether the servo board. Afterwards, remove
the servo board and glue the support boards
in the hull.
7. The deck
To build the deck, you will need an even build-
ing board of approx. 115 cm x 30 cm.
Cover the building board with household foil so
that the deck can be glued on top and will not
stick.
Attach the halves of the deck 2 on the holes
provided to glue onto the building board.
Status July 2019
2
5 cm
37 38
Page 8
This will mean that the deck lies flat and can-
not warp when the glue dries. To glue wooden
parts, for best results, use waterproof wood
glue.
Next, glue the bulkheads 3-12 into the re-
cesses in the deck.
Glue to a block each 3 parts 18, 19, 21, 22 und
23.
©
Krick Modelltechnik Knittlingen Germany
18
19
21
22
23