Krick Sea Cruiser ARIADNE Building Instructions page 60

The adhesive tape allows the roof frame to be
lifted carefully out of the body without any
problems after removing the clamps.
60
Now the roof covering part 59 and 60 can be
applied. The order of the planking from the
middle of the roof is part 60, 2 * part 59, 1 *
part 60 and 2 * part 59 on each side.
For this purpose, mark 10mm in the roof centre
for the first plank.
The first plank can now be glued on.
Now glue the remaining planks alternately. To
do this, sand one edge of the next plank bev-
elled so that the plank fits snugly to the previ-
ous one.
Status July 2019
59
Now the edge of the body roof can also be
sanded so that it protrudes evenly on all sides
of the body.
The next step would be to build the skylight. To
do this, assemble parts 63 to 66.
Using a right-angled object, glue parts 63 and
64 together.
Glue the 2 skylight halves together.
Page 17
64
63
©
Krick Modelltechnik Knittlingen Germany