Krick Sea Cruiser ARIADNE Building Instructions page 59

To glue the parts together, apply glue to the
edges and clamp them together around the
coaming. In this way we achieve an exact fit.
Due to the Sellotape the mounting frame can-
not stick to the coaming and can be removed
with care.
Now the cover part 49 can be glued on.
71
Now fit the doubling part 71 into the compan-
ionway and glue it with part 70.
Finally make the removable roof of the super-
structure. First, tape the edges with Sellotape
for protection.
Fit the roof formers 56 and 58.
Then glue in parts 55 and clamp them against
the superstructure wall.
Status July 2019
49
Then fit the central bulkhead 57 and glue it in
place.
Now glue the reinforcing corners pos. 91 into
the roof frame.
70
56
Now the roof frame is finished and should dry.
Page 16
57
91
55
©
Krick Modelltechnik Knittlingen Germany