Krick Sea Cruiser ARIADNE Building Instructions page 72

Slide the mast slides onto the front leech and
foot leech of the mainsail at intervals of 70 to
80 mm. For better sliding on, slightly widen one
side. The sliders should not fall off the leech.
Now fix the sliders to the sail with medium
viscous superglue from both sides.
The next step is to sew the stay riders to the
jib.
Mark the position 50 mm from the bottom leech
and then at a distance of 100 mm.
Status July 2019
12. Installing the sail winch, sails and rud-
der servo
12.1. Installation of the sail winch
The sail winch is not part of the kit and must be
purchased separately.
Page 29 ©
Krick Modelltechnik Knittlingen Germany