Krick Sea Cruiser ARIADNE Building Instructions page 52

Then glue the pieces to the deck at the marked
places.
22 21
23
20
15
Next glue the frame parts 13, 14, 15 and 20 at
the deck openings between the bulkheads.
20
14
14
In the next step glue the filling block 16 to the
stern and shape it to the contour of the fuse-
lage.
Status July 2019
19
13
18
13
15
Page 9
Next, attach the documents for the division of
the upper deck. Glue parts 17 to the deck at
the intended / marked position.
17
Then grind the underlay according to the
course of the bulkheads so that the toothing
area of the upper deck 24 is optimally sup-
ported.
Now the coaming edges of parts 25 to 28 of
the deck openings are glued in. First glue in
the coaming edge of the wheelhouse part 25
and 26. Glue part 26 to the fixing tab only after
removing the finished deck from the building
board, so that the deck can still be fixed flat on
the building board. The installation of the two
coaming edges is to facilitate the alignment of
the upper deck.
©
Krick Modelltechnik Knittlingen Germany
16