Two 8 X Anybay Backplanes (Gen 4) - Lenovo ThinkSystem SR650 V3 7D75 User Manual

Figure 294. SAS/SATA cable routing to onboard connectors
From
Backplane 1: SAS
1
Backplane 2: SAS
2

Two 8 x AnyBay backplanes (Gen 4)

This section provides cable routing information for the server model with two 8 x 2.5-inch AnyBay front drive
backplanes (Gen 4).
To connect power cables for the front backplane(s), refer to
drive bays" on page 297.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
• "Onboard connectors + 16i RAID/HBA adapter" on page 312
• "Trimode 8i RAID adapter" on page 313
• "Trimode 16i RAID adapter" on page 314
16 x AnyBay
This topic provides cable routing information for the 16 x AnyBay (Gen 4) configuration.
• "Onboard connectors + 16i RAID/HBA adapter" on page 312
To
Onboard: SATA 0, SATA 1
Onboard: SATA 2, M.2 signal connector
"Backplanes: server models with 2.5-inch front
Chapter 6
.
Internal cable routing
311