System Fan Replacement - Lenovo ThinkSystem SR650 V3 7D75 User Manual

Hide thumbs Also See for ThinkSystem SR650 V3 7D75:
Table of Contents

Advertisement

3. Click Update VPD, then, follow on-screen instructions to update the VPD.
Using Lenovo XClarity Essentials OneCLI commands
• Updating machine type
onecli config set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
• Updating serial number
onecli config set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
• Updating system model
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifier <system model> [access_method]
onecli config set SYSTEM_PROD_DATA.SysInfoProdIdentifierEx <system model> --override [access_method]
• Updating asset tag
onecli config set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
• Updating UUID
onecli config createuuid SYSTEM_PROD_DATA.SysInfoUUID [access_method]
Variable
<m/t_model>
<s/n>
<system model>
<asset_tag>
[access_method]

System fan replacement

Use this information to remove and install a system fan.
ThinkSystem SR650 V3 User Guide
254
Description
The server machine type and model number.
Type xxxxyyy, where xxxx is the machine type and yyy is the server model number.
The serial number on the server.
Type zzzzzzz, where zzzzzzz is the serial number.
The system model on the server.
Type system yyyyyyyy, where yyyyyyyy is the product identifier.
The server asset tag number.
Type aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa, where aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa is
the asset tag number.
The access method that you select to access the target server.
• Online KCS (unauthenticated and user restricted):
You can directly delete [access_method] from the command.
• Online authenticated LAN:
In this case, specify below LAN account information at the end of the OneCLI
command:
--bmc-username <user_id> --bmc-password <password>
• Remote WAN/LAN:
In this case, specify below XCC account information and IP address at the end of the
OneCLI command:
--bmc <bmc_user_id>:<bmc_password>@<bmc_external_IP>
Notes:
– <bmc_user_id>
The BMC account name (1 of 12 accounts). The default value is USERID.
– <bmc_password>
The BMC account password (1 of 12 accounts).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Thinksystem sr650 v3 7d76Thinksystem sr650 v3 7d77

Table of Contents