Table of Contents
Advertisement
Figure 333. Rear backplane cable routing
From
Backplane 4: SAS
1
Backplane 4: PWR
2
24 x 2.5" SAS/SATA + 8 x 2.5" SAS/SATA
This topic provides cable routing information for the 24 x 2.5-inch SAS/SATA front backplane and an 8 x 2.5-
inch SAS/SATA rear backplane.
To connect power cables for the front backplane(s), refer to
drive bays" on page
297.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"32i RAID/HBA adapter" on page 347
•
"16i RAID/HBA adapters" on page 348
•
"CFF expander + 8i/16i RAID/HBA adapter" on page 352
•
"CFF 16i RAID/HBA + SFF 16i RAID/HBA adapters" on page 350
•
"CFF 16i RAID/HBA adapter + CFF expander" on page 354
ThinkSystem SR650 V3 User Guide
346
To
CFF expander
• C3
Onboard: 7mm backplane power connector
"Backplanes: server models with 2.5-inch front
Advertisement
Table of Contents
