Table of Contents
Advertisement
Figure 74. Installing the GPU adapter
a.
Open the blue latch on the riser cage.
b.
Align the GPU adapter with the PCIe slot on the riser card. Then, carefully press the GPU
adapter straight into the slot until it is securely seated.
c.
Close the blue latch.
Step 4.
Install the riser assembly with the GPU adapter.
• GPU adapter on riser 1 or 2 assembly
1. Install the GPU air baffle.
(Optional) If a single-wide FHFL GPU adapter is to be installed on slot 1, 4, or 7, but the
adjacent slot will be left empty or installed with a half-length adapter, install an add-on air
baffle 1 on the GPU air baffle first.
Figure 75. Installing an add-on air baffle 1
2. Connect the GPU power cable. See
3. Install the riser assembly with the GPU adapter.
ThinkSystem SR650 V3 User Guide
114
Chapter 6 "Internal cable routing" on page
271.
Advertisement
Table of Contents
