Table of Contents
Advertisement
Figure 190. 7mm drive cage installation
a.
Align the left-side pin on the 7mm drive cage with the positioning slot on the securing clip,
the two holes on the side brackets of the 7mm drive cage with the two holes on the front of the
riser cage.
b.
Install the two screws to secure the 7mm drive cage in place.
Step 3.
Install the 7mm riser assembly to the chassis.
• 2FH+7mm SSD riser cage
Figure 191. 2FH+7mm SSD riser cage installation
a.
Align the riser assembly with the slot on the system board assembly, lower and insert the
riser into the riser slot.
b.
Tighten the screw to secure the riser assembly in place.
• 7mm SSD riser cage
ThinkSystem SR650 V3 User Guide
220
Advertisement
Table of Contents
