Lenovo ThinkSystem SR650 V3 7D75 User Manual page 107

Figure 52. Drive backplane numbering
1
Back- Backplane
plane
quantity
1
• 8-bay SAS/SATA
• 8-bay NVMe
• 8-bay AnyBay
2
8-bay SAS/SATA
8-bay NVMe
8-bay AnyBay
8-bay SAS/SATA
8-bay AnyBay
3 8-bay SAS/SATA
8-bay NVMe
8-bay AnyBay
8-bay SAS/SATA
8-bay SAS/SATA
1
Attention:
• Read "Installation Guidelines" on page 55
work safely.
• To avoid damage to the drive connectors, make sure that the server top cover is in place and fully closed
whenever you install or remove a drive.
• To make sure that there is adequate system cooling, do not operate the server for more than two minutes
without either a drive or a drive bay filler installed in each bay.
• Before you remove or make changes to drives, drive controllers (including controllers that are integrated
on the system board assembly), drive backplanes or drive cables, back up all important data that is stored
on drives.
Firmware and driver download: You might need to update the firmware or driver after replacing a
component.
• Go to
https://datacentersupport.lenovo.com/products/servers/thinksystem/sr650v3/7d75/downloads/driver-
to see the latest firmware and driver updates for your server.
list/
2
Backplane
8-bay SAS/SATA
8-bay NVMe
8-bay AnyBay
• 8-bay NVMe
• 8-bay AnyBay
8-bay NVMe
8-bay SAS/SATA
8-bay NVMe
8-bay AnyBay
8-bay SAS/SATA
8-bay NVMe
24-bay backplane with expander
and "Safety inspection checklist" on page 56
Chapter 5
3
Backplane
8-bay SAS/SATA
8-bay NVMe
8-bay AnyBay
• 8-bay AnyBay
• 8-bay NVMe
8-bay NVMe
to ensure that you
.
Hardware replacement procedures
97