Figure 354. Middle backplane cable routing
From
Backplane 5: SAS
1
Backplane 5: PWR
2
24 x 2.5" SAS/SATA + 8 x 2.5" SAS/SATA
This topic provides cable routing information for the 24 x 2.5-inch SAS/SATA front backplane and two 4 x
2.5-inch SAS/SATA middle backplanes.
To connect power cables for the front backplane(s), refer to
drive bays" on page
297.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"32i RAID/HBA adapter" on page 362
•
"16i RAID/HBA adapters" on page 363
To
16i adapter
• Gen 4: C1
• Gen 3: C2
• Onboard: backplane power
• Onboard: backplane sideband
• Riser 1: PWR
"Backplanes: server models with 2.5-inch front
Chapter 6
.
Internal cable routing
361