Table of Contents
Advertisement
Two-AnyBay-backplane combinations
Follow the instructions in this section to learn how do cable routing for combinations with two AnyBay
backplanes.
Note: These combinations require four installed processors.
See the following sections for cable routing combinations with two AnyBay drive backplanes.
• "Without PCIe switch card" on page 100
– "Two backplanes" on page 100
– "Three backplanes" on page 102
– "Four backplanes" on page 105
– "Six backplanes" on page 107
• "With PCIe switch card" on page 112
– "Two backplanes" on page 113
– "Three backplanes" on page 114
– "Four backplanes" on page 116
– "Six backplanes" on page 118
Without PCIe switch card
Follow the instructions in this section to learn how do cable routing for combinations with two AnyBay
backplanes and not PCIe switch card.
Note: See "Connecting cables to the processor and memory expansion tray" on page 46 to perform the
procedure properly while connecting PCIe cables to the processor and memory expansion tray.
Two backplanes
Two AnyBay backplanes
ThinkSystem SR860 V2Setup Guide
100
Advertisement
Table of Contents
