Table of Contents
Advertisement
Figure 63. Diagnostics panel installation
Step 3.
Install the front I/O module.
Figure 64. Front I/O module without the LCD display
a.
Insert the front I/O module into the front chassis.
b.
Install the screw to secure the front I/O module in place.
After you finish
1. Connect the cables of the front I/O module to the system board assembly. See
routing" on page
271.
2. Complete the parts replacement. See
GPU replacement
Use this information to remove and install a GPU adapter.
ThinkSystem SR650 V3 User Guide
108
Figure 65. Front I/O module with the LCD display
(integrated diagnostics panel)
"Complete the parts replacement" on page
Chapter 6 "Internal cable
269.
Advertisement
Table of Contents
