Table of Contents
Advertisement
Location of the External Diagnostics Handset
Location
The External Diagnostics Handset is connected to the
server with an external cable.
Note: Pay attention to the following steps when unplugging the external handset:
Step 1. Press the plastic clip on the plug in the shown direction.
Step 2. Gently pull out the cable from the connector while keeping the clip pressed down.
Diagnostics panel overview
The diagnostics device consists of an LCD display and 5 navigation buttons.
Description
External Diagnostics Handset
1
Magnetic bottom
2
With this component, the diagnostic handset can be
attached to the top or side of the rack with hands spared
for service tasks.
External diagnostics connector
3
This connector is located on the front of the server and is
used to connect an external LCD diagnostics handset.
Chapter 8
.
Problem determination
463
Advertisement
Table of Contents
