Figure 134. Riser 3/4 assembly installation
Step 2.
Connect cables to the riser card and PCIe adapter. See
271.
After you finish
Complete the parts replacement. See
Power supply unit replacement
Use this information to remove and install a power supply unit.
•
"Remove a power supply unit" on page 172
•
"Install a power supply unit" on page 174
Safety precautions
The section lists safety precautions that apply to AC and DC power supply units respectively. Understand
and apply the safety precautions before removing or installing a power supply unit.
Safety precautions for AC power supplies
The following tips describe the information that you must consider when you replace an AC power supply.
"Complete the parts replacement" on page
Chapter 6 "Internal cable routing" on page
269.
.
Chapter 5
Hardware replacement procedures
169