Lenovo ThinkSystem SR650 V3 7D75 User Manual page 32

Figure 5. Front I/O module (on rack latch)
Table 12. Components on the front I/O module
Callout
USB 3 (5 Gbps) connector
1
Power button with power status LED
3
System ID button with system ID LED
5
Front operator panel
7
USB 3 (5 Gbps) connector
1
The USB 3.2 Gen 1 (5 Gbps) connector can be used to attach a USB-compatible device, such as a USB
keyboard, USB mouse, or USB storage device.
2 USB 2.0 connector with XClarity Controller management
Depending on the setting, this connector supports USB 2.0 function, XClarity Controller management
function, or both.
• If the connector is set for USB 2.0 function, it can be used to attach a USB-compatible device, such as a
USB keyboard, USB mouse, or USB storage device.
• If the connector is set for XClarity Controller management function, it can be used to connect the server to
an android or iOS device, where you can then install and launch the Lenovo XClarity Mobile app to
manage the system using XClarity Controller.
For details about using the Lenovo XClarity Mobile app, refer to
com.lenovo.lxca.doc/lxca_usemobileapp.html
• If the connector is set to have both functions, you can press the system ID button for three seconds to
switch between the two functions.
3 Power button with power status LED
ThinkSystem SR650 V3 User Guide
22
Figure 6. Front I/O module (on media bay)
Callout
USB 2.0 connector with XClarity Controller
2
management
Network activity LED (for OCP module)
4
System error LED
6
http://sysmgt.lenovofiles.com/help/topic/