Table of Contents
Advertisement
Figure 229. Disassembling the serial port module
After you finish
1. Install a new serial port module, a PCIe adapter, or a filler to cover the place. See
module" on page 264
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
Install a serial port module
Use this information to install a serial port module.
About this task
Attention:
• Read
"Installation Guidelines" on page 55
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure
A video of this procedure is available at YouTube:
BmyijyY0-lNvapM4fTV5Gf
Procedure
Note: The riser bracket in below illustrations might look different from your riser bracket. The installation
procedure is the same.
Step 1.
Touch the static-protective package that contains the new part to any unpainted surface on the
outside of the server. Then, take the new part out of the package and place it on a static-protective
surface.
Step 2.
Use a 5 mm wrench to install the serial port cable into the bracket.
ThinkSystem SR650 V3 User Guide
264
and
"Install a riser assembly" on page
and
"Safety inspection checklist" on page 56
73.
.
166.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Install a serial port
to ensure that you
Advertisement
Table of Contents
