Table of Contents
Advertisement
3.
During POST, press F9 to access System Utilities.
4.
On the System Utilities home screen, select System Configuration > BIOS/Platform Configuration (RBSU) > Advanced
Options > Advanced Service Options.
5.
Select the Serial Number field and press Enter.
The following alert appears:
The serial number is modified by qualified service personnel and must match
the serial number located on the chassis.
6.
Click OK.
7.
Type the serial number and press Enter.
8.
Select the Product ID field and press Enter.
The following alert appears:
Product ID is modified only by qualified personnel. This value must match the
product ID located on the chassis.
9.
Type the product ID and press Enter.
10. Press F10 to save the configuration.
11. After the compute module resets and goes through POST, power down the compute module.
The procedure is complete.
Unassigning a server profile using HPE OneView
Procedure
1. From the HPE OneView main menu, select Server Profiles.
2. In the master profile, select the profile to unassign.
3. Select Actions > Edit.
4. In the Server hardware box, select unassigned.
5. Click OK.
Reassigning a server profile using HPE OneView
Procedure
1. From the HPE OneView main menu, select Server Profiles.
2. In the master profile, select the profile that was previously unassigned.
3. Select Actions > Edit.
4. In the Server hardware box, select the appropriate server.
5. Click OK.
Removal and replacement procedures
77
Advertisement
Table of Contents
