Table of Contents
Advertisement
Hot-plug drive LED definitions
Item
LED
1
Locate
2
Activity
ring
3
Do not
remove
4
Drive
status
Status
Definition
Solid blue
The drive is being identified by a host application.
Flashing blue
The drive carrier firmware is being updated or requires an update.
Rotating green
Drive activity
Off
No drive activity
Solid white
Do not remove the drive. Removing the drive causes one or more of the logical
drives to fail.
Off
Removing the drive does not cause a logical drive to fail.
Solid green
The drive is a member of one or more logical drives.
The drive is doing one of the following:
Flashing green
•
Rebuilding
•
Performing a RAID migration
•
Performing a strip size migration
•
Performing a capacity expansion
•
Performing a logical drive extension
•
Erasing
•
Spare part activation
Flashing amber/
The drive is a member of one or more logical drives and predicts the drive will fail.
green
Flashing amber
The drive is not configured and predicts the drive will fail.
Solid amber
The drive has failed.
Off
The drive is not configured by a RAID controller or a spare drive.
Component identification
98
Advertisement
Table of Contents
