Removing And Replacing The Mezzanine Assembly - HPE Synergy 480 Gen10 Maintenance And Service Manual

To replace the component, reverse the removal procedure.
More information
Powering down the graphics expansion module
Removing the graphics expansion module from the frame
Removing the access panel
Removing and replacing the Multi-MXM graphics expansion
Removing the PCIe graphics expansion from the compute module

Removing and replacing the mezzanine assembly

Procedure
1. Remove the graphics expansion module.
2. Place the graphics expansion module on a flat, level work surface.
3. Remove the access panel.
4. Remove all mezzanine option cards.
5. Remove the mezzanine assembly.
Removal and replacement procedures
71