Table of Contents
Advertisement
d. Turn the processor heatsink assembly over and place it on a work surface with the processor facing up.
e. Install the dust cover each processor socket on the failed system board.
8.
Install the processor heatsink assembly:
a. Remove the dust cover.
b. Locate the Pin 1 indicator on the processor frame and the socket.
c. Align the processor heatsink assembly with the alignment posts and gently lower it down until it sits evenly on the
socket.
The heatsink alignment posts are keyed. The processor will only install one way.
A standard heatsink is shown. Your heatsink might look different.
d. Using a T-30 Torx screwdriver, tighten the nuts until they stop.
Removal and replacement procedures
79
Advertisement
Table of Contents
