Table of Contents
Advertisement
8. Loosen the screws on the mezzanine pass-thru board in mezzanine slot 2, and then remove the board.
More information
Powering down the graphics expansion module
Removing the graphics expansion module from the frame
Removing the access panel
Removing and replacing the Multi-MXM graphics expansion
Replacing the Multi-MXM mezzanine pass-thru board
Procedure
1. Locate the mezzanine slots in the compute module.
2. Verify that the mezzanine support bracket is installed.
Removal and replacement procedures
86
Advertisement
Table of Contents
