Removing The Graphics Mezzanine Heatsink From The Graphics Board - HPE Synergy 480 Gen10 Maintenance And Service Manual

7. Rotate the heatsink with graphics board and remove it from the connector.
To replace the component, reverse the removal procedure.
More information
Powering down the graphics expansion module
Removing the graphics expansion module from the frame
Removing the access panel

Removing the graphics mezzanine heatsink from the graphics board

Procedure
1. Power down the graphics expansion module.
2. Remove the graphics expansion module.
3. Place the graphics expansion module on a flat, level work surface.
Removal and replacement procedures
83