Table of Contents
Advertisement
8. ransfer the A8 3.5" internal disk drive assembly:
Remove the disk drive from the old board and install it on the replacement assembly.
9. ransfer all cable assemblies:
Remove all cable assemblies from the old board and properly attach them to the
replacement board.
he replacement CPU board is now ready to be installed.
Note
In the unlikely event that the bootROM has failed, then the replacement board
(which has the transferred bootROM installed) will also \fail." A \minimum
con guration" bootROM is included in the service kit to help isolate this type of
failure. If it is proven that the bootROM has failed, contact your local HP sales
or service oce for assistance.
Note
If you have ordered a rebuilt-exchange assembly, the failed CPU assembly must
be returned with the SIMM module installed.
Assembly Replacement
3-7
Advertisement
Table of Contents
