Parts Identification; Reference Designations; Cabinet Parts And Hardware; Accessories And Miscellaneous Items - Agilent Technologies 53147A Assembly Level Service Manual

Chapter 4 Replaceable Parts

Parts Identification

Parts Identification
To identify the part(s) you need, refer to the exploded views in Figures 4-1
and 4-2 and the top view of the chassis in Figure 4-3.
When ordering from Agilent Technologies, the important numbers to note
from the Parts List are the Agilent Part Number and the quantity of the
part(s) you need.

Reference Designations

Table 4-1 lists the reference designations used in the parts lists.
Table 4-1. Reference Designations
A = assembly
H = hardware
J = electrical connector
(stationary portion); jack
MP = miscellaneous mechanical part
P = electrical connector
(movable portion); plug

Cabinet Parts and Hardware

To locate and identify cabinet and external parts and mounting hardware,
refer to Figure 4-2 (internal parts and mounting hardware are shown in
Figure 4-1). These figures provide different views of the instrument, with
the parts identified by reference designations; the reference designations
correspond with the ones in Table 4-2.

Accessories and Miscellaneous Items

Table 4-3 lists all of the accessories available for the Counter and also
lists some other miscellaneous items, such as power cords, rack mounts,
and manuals.
Assembly Level Service Guide
P/0 = part of
S = switch
T = transformer
TP = test point
U = integrated circuit; microcircuit
W = cable; transmission path; wire
4-5