Make A Re Ection Measurement - Agilent Technologies 8711C Service Manual

Make a e ection Measurement
1. Leave the cable connected to the analyzer.
2. Press
(see the cautions on page 1-6) .
Reflection
PRESET MEAS1
5 5
0
3. Verify that the data trace falls completely below 16 dB. See Figure 1-4 for a typical
HP 8713C/14C trace.
Figure OPREFL here.
Figure 1-4. Typical P 8713C/14C Re ection Measurement
Performance T ests 1-9