Power Up The System - Nortel CC MIS User Manual

Shutdown, startup, reboot, and power down

Power up the system

Use the following procedure to power up the CC MIS system, including the
CC MIS application, after it is powered down using the Power Down the
System command.
Note: Perform only Step 1 if the CC MIS application was running prior to
the system being powered down. Perform all of the steps if the CC MIS
application was shut down prior to the system being powered down.
Procedure 20:
1 Turn on power using the power button on the server.
Note: System startup can take several minutes.
After the system startup is complete, the system displays the following
prompt:
Console login:
2 Type ccmis.
The system displays the password prompt:
Password:
3 Type the password.
The Maintenance and Administration main menu appears.
4 Type r to select the Run State Utilities option.
The Run State Utilities menu appears.
170
Powering up the CC MIS system
Call Center Management Information System
Standard 2.0