Accessing The Update Switch Configuration Data Screen - Nortel CC MIS User Manual

May 2007
Accessing the Update Switch
Configuration Data screen
Perform the steps in Procedure 62 to access the Update Switch
Configuration Data screen.
Procedure 62:
1 Access the Maintenance and Administration main menu.
2 Type r to select Run State Utilities.
The system displays the Run State Utilities menu (see Figure 116 on
page 325).
Figure 116:
3 Type u to select the Update Switch Configuration Data command.
The system displays the Update Switch Configuration screen.
For single links, enter y to run the switch configuration update for the
specified link (or type q to quit without running the update).
Figure 117 on page 326 shows an example of the prompt for a single
link.
CC MIS Installation and Maintenance

Accessing the Update Switch Configuration Data screen

Run State Utilities menu
Switch configuration data updates
325