Age Messages - Nortel CC MIS User Manual

System Log messages

AGE messages

Introduction
This section contains error messages generated by the Automatic Historical
Data Compaction Process of the CC MIS product.
Note: The CC MIS product runs on a Down Stream Processor, therefore the
error messages do not appear in the switch log.
This section lists only those messages which are unique to the Automatic
Historical Compaction Process. Messages listed in "Standard error
messages" on page 456 may also be generated by this process.
Warning messages
This section lists the warning messages that may be generated by AGE.
These messages usually indicate an unusual condition that can be
appropriately handled by the process, and which does not prevent the
process from continuing execution.
Could not remove ager signal file "yyyy"
AGE was unable to remove ager signal file. (Action Code: B)
Could not reduce database size
AGE was unable to remove data to make more space. (Action Code: C)
Can't read storage limits for yyyy yyyy
An error was encountered when reading the config db. (Action Code: B)
Could not create ager signal file "yyyy"
AGE was unable to create the ager signal file. (Action Code: B)
Unable to lock HDB_AGED database
Cannot lock the AGED portion of the database. (Action Code: B)
544 Call Center Management Information System
Standard 2.0