Simulator Link - Nortel CC MIS User Manual

May 2007

Simulator link

If you choose Simulator as the link type, the Enabled and Simulator
Configuration fields appear on the screen. Figure 32 shows the Switch Link
Configuration screen for a Simulator link.
Figure 32:
You specify Simulator link definitions to set aside a link number to specify
that a partition should connect to the simulator.
Note: The configuration information is explained in the online Help. Press
the Help function key to view the Help text for this screen.
CC MIS Installation and Maintenance
Switch Link Configuration screen - Simulator link
Configuring the CC MIS application
147