Cfgdb Messages - Nortel CC MIS User Manual

Call center management information system

Hide thumbs Also See for CC MIS:

Table of Contents

CFGDB messages

Introduction

This section contains the error messages generated by the CFGDB

subsystem of the CC MIS product.

Note: The CC MIS product runs on a Down Stream Processor, therefore the

error messages do not appear in the switch log.

Warning messages

This section lists the warning messages that may be generated by the

CFGDB process. These messages usually indicate an unusual condition that

can be appropriately handled by the CFGDB process, and which does not

prevent the CFGDB process from continuing execution. Although not fatal,

many of these warnings indicate a serious condition that may require

Unable to lock configuration database

An error occurred trying to lock the configuration database.

(Action Code: B)

Unable to obtain CONFDB read lock

An error occurred trying to obtain a read lock on the configuration database.

(Action Code: B)

Unable to obtain CONFDB write lock

An error occurred trying to obtain a write lock on the configuration

database. (Action Code: B)

Unable to unlock configuration database

An error occurred trying to unlock the configuration database.

(Action Code: B)

CC MIS Installation and Maintenance

System Log messages