Nortel CallPilot Administrator's Manual page 68

68 Chapter 5 Using Directory Synchronization
4
5
Copyright © 2007, Nortel Networks
.
the preceding illustration your account exists in the verification
organizational unit. Change the LDAP DN to:
"cn=wayne anderson,ou=verification,ou=callpilot,dc=willim-
r220110,dc=ca,dc=nortel,dc=com." (Refer to "Configure a
connection profile" figure following Step 5.)
i. Password and Confirm Password: This is the password
associated with the User Name or LDAP DN.
j. Use SSL: Select if communication to this directory is to
be encrypted through SSL. Enabling SSL slows down the
synchronization, but secures the connection.
Note: SSL is not enabled by default on AD. Your Active
Directory administrator must set up Certificate Services and
publish a valid certificate before Directory Synchronization or
any other application can use SSL with AD.
k. SSL Port: Ask the Active Directory Administrator for the port
number. The default is 636.
Click on the Test button.
Result: A pop-up dialog box informs the administrator whether the
defined server can be contacted.
Note: If the test is unsuccessful, carefully check the information
in each field.
Click Save.
Result: The Directory Connection is saved. The Directory
Synchronization screen appears. The newly configured Directory
Connection is displayed as a link on the screen.
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007