Nortel CallPilot Administrator's Manual page 184

184 Chapter 10 Configuring CallPilot services
•
Configuration requirements
For local broadcasts:
•
•
•
For location and network broadcasts:
•
•
•
•
Copyright © 2007, Nortel Networks
.
all users at a specific remote site or switch location in the messaging
network.
both local broadcast and network broadcast (includes network location
broadcast) capability. A network broadcast is a message that is sent to
all mailboxes at both local and remote sites (including switch locations)
in the messaging network.
An administrator with access to CallPilot Manager Messaging
Management functionality must define broadcast message numbers.
An administrator with access to CallPilot Manager Mailbox Classes
functionality must set up mailbox classes that permit local broadcast
capability.
An administrator with access to CallPilot Manager User Administration
functionality must ensure that mailbox owners are assigned a mailbox
class with local broadcast capability enabled.
Note: The Mailbox number field in Messaging Management -
Broadcast Information must not be left blank. The Network Broadcast
Number is blank by default.
Networking or Network Message Service (NMS) must be installed on
the CallPilot server.
Broadcast message capability must be enabled between the local
CallPilot server and remote messaging servers.
Remote messaging servers must run either Meridian Mail release 12 or
later, or CallPilot 2.0 or later.
An administrator with access to CallPilot Manager Mailbox Classes
functionality must set up mailbox classes that permit network broadcast
capability.
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007