Nortel CallPilot Administrator's Manual page 67

Copyright © 2007, Nortel Networks
.
e. LDAP Port: Ask the Active Directory Administrator for the port
number. The default is 389.
f. Connect As: If LDAP DN is selected, the User Name field is
unavailable.
g. User Name: Directory Administrator level credentials. This is the
user name given to you by the Active Directory Administrator.
See "Defining the Active Directory Requirements" on
the Active Directory requirements" (page
Account is not in the Users folder (refer to the following figure),
then LDAP DN must be selected in step h.
h. LDAP DN: The LDAP DN must be used to authenticate using
the LDAP protocol. The LDAP DN is automatically filled in as
other fields are entered, and assumes that your account is in the
Users folder. If your account is not in the Users folder, select the
LDAP DN radio button and type in the LDAP DN information. In
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007
Using Directory Synchronization 67
62). If the User
"Defining