Nortel CallPilot Administrator's Manual page 182

182 Chapter 10 Configuring CallPilot services
Inbound SDNs
Inbound SDNs are required for dialable services. The SDN is the number
that callers dial to access the service. You must add these SDNs to the
CallPilot Manager SDN Table. After you add an SDN you can change its
default configuration.
Outbound SDNs
Outbound SDNs are added to the SDN Table automatically during
installation. Outbound SDNs are not dialed by callers. They are used by
the system to place outbound calls and to determine the channel resources
allocated to the service. You cannot use CallPilot Manager to create or
modify outbound SDNs.
Typically, default outbound SDNs listed in the SDN table include:
•
•
•
•
•
•
If the networking feature is provided, all networking solutions are installed
automatically. These include
•
•
If your system was purchased with the appropriate keycode, there might
also be a multimedia messaging SDN.
Restrictions on editing outbound SDNs
Outbound SDNs are automatically created by the system during installation.
You cannot
•
•
•
•
Copyright © 2007, Nortel Networks
.
OUTBOUND11 (remote notification)
OUTBOUND15 (multi-delivery to fax)
OUTBOUND18 (desktop telephony agent)
OUTBOUND6 (admin agent)
OUTBOUND7 (delivery to telephone)
OUTBOUND8 (delivery to fax)
OUTBOUND9 (enterprise networking)
AMIS networking
create or delete an outbound SDN
rename an outbound SDN
change the actual SDN (This number is specific to each service and
is automatically assigned.)
modify the session profile or callback handling properties
Nortel CallPilot
Administrator Guide
NN44200-601 01.11 Standard
5.0 9 November 2007