Nortel BCM50 2.0 Configuration Manual page 79

Figure 24 System Timers
Table 25 describes the timers.
Table 25 Timer values
Attribute Values
Camp timeout 30, 45, 60, 90, 120, 150,
(sec.) or 180
Park timeout 30, 45, 60, 90, 120, 150,
(sec.) 180, 300, or 600
Page timeout 15, 30, 60, 120, 180,
(sec.) 300, 600, or 2700
Transfer callback After 3 rings
timeout After 4 rings
After 5 rings
After 6 rings
After 12 rings
Off
*Network Callback 15
30
45
60
90
120
Chapter 9 Global telephony settings
Description
Assign the number of seconds before an unanswered camped call
returns to the telephone that camped the call. Also refer to
on page 209.
Default: 45 seconds
Assign the number of seconds before a parked call on an external line
returns to the telephone which parked the call. This interval is used for
SWCA lines as well. Also refer to"Call Park codes" in the Networking
Configuration Guide (NN40020-603).
Default: 45 seconds
Define the period of time after which the paging feature automatically
disconnects. Also refer to
Default: 180 seconds
Specify the number of rings before a callback occurs on a transferred
call. You can estimate the delay in seconds, if you multiply the number
of rings by six.
Note: This setting can affect transferred calls from voice mail and
must be configured accordingly.
Also refer to "Line Access tab" on page 43
Default: After 4 rings
Determine the timeout value when a transfer attempt stops and then
attempt a retry of the transfer.
*Not available in all region profiles.
"Paging" on page 219.
(Call forward).
Device Configuration Guide
79
"Camp-on"