Nortel BCM50 2.0 Configuration Manual page 64

64 Chapter 6 DN records parameters
Table 18 User Speed Dial panel fields (Sheet 2 of 2)
Setting Values
Facility Use prime line
Use routing table
Actions
Add 1. On the Capabilities and Preferences tab, choose the DN record where you want to add
User Speed dials.
2. Under the User Speed Dial Numbers table, click Add.
3. Enter the appropriate speed dial number.
4. Click OK.
5. On the User Speed Dial, click the External Number field beside the number you entered.
6. Enter an external number to dial.
7. Click the Facility field beside the number you entered.
8. Enter how the number must be routed out of the system.
Delete 1. On the Capabilities and Preferences tab, choose the DN record where you want to delete
User Speed dial entries.
2. On the User Speed Dial Numbers table, click the user speed dial code or codes that you
want to delete.
3. Click Delete.
4. Click OK to save changes.
NN40020-300 NN40020-300
Description
Select the route you want the dialed number to take out of your
system.
Note: Any line numbers or line pool codes that you specify must
be assigned to the telephone where the code is entered.
If you choose prime line, a prime line must be assigned to the
telephone where the code is entered.
Refer to "Line Assignment tab" on page 46.