Nortel BCM50 2.0 Configuration Manual page 296

296 Chapter 30 Configuring the music source
Table 91 Music parameters (Sheet 2 of 2)
Setting
Streaming Server
Note: A third party application, that supports streaming G.711, is required.
Server
Server RTP port
Stream Type
Frames per packet
RTP port on BCM
Note: If you choose Audio Jack as the Music Source, there is no further configuration
required for the Music Source.
NN40020-300 NN40020-300
Definition
Enter the IP Address of the network device that contains the music source.
Enter the source port number to use when connecting to the network device that contains
the music source.
Select the codec of the audio file provided by the network device.
Enter the frames per packet to be received from the network device.
Enter destination port number used on the BCM for sending out music to users.