Nortel BCM50 2.0 Configuration Manual page 56

56 Chapter 6 DN records parameters
Table 15 Preferences panel fields (Sheet 2 of 3)
Setting
Dialing options
Contrast
Ring type
Distinct rings in use
Aux. ringer
Call log options
Log space
Available log space
Reset Call Log
Password
Hotline type
NN40020-300 NN40020-300
Values Description
Standard dial Determine how the telephone handles dialed information.
Automatic dial Standard: Lift the receiver and dial.
Pre-dial Automatic dial: Use for devices, such as fax machines where
you want the number to dial out without external cues.
Pre-dial: Dial the numbers, then lift the handset to allow the
telephone to dial the number.
Note: Not all devices show all three options.
1 through 9 Adjust the contrast of the display.
1, 2, 3, or 4 Select a distinctive ring pattern type for the telephone.
Default is 1.
<read-only> Indicates the distinct ring patterns, if any, are currently in
effect on any lines, telephones, or Hunt groups on the
system. Refer to the Warning below.
Warning:
If you assign a distinctive ring pattern to a telephone, and that distinctive ring
pattern has already been assigned to a line, all lines with that ring pattern will be
reset to None.
If you assign a distinctive ring pattern to a line, and that distinctive ring pattern has
already been assigned to a telephone, all telephones with that ring pattern are
reset to pattern 1. You also can assign a distinctive ring pattern to a Hunt group.
<check box> Determine whether an auxiliary ringer (if installed) rings for
incoming calls at this telephone.
No autologging Select how you want the telephone to handle logging calls.
No one answered No autologging: No calls are logged automatically.
Unanswered by me No one answered: Unanswered calls are logged.
Log all calls Unanswered by me: Unanswered calls are logged.
Log all calls: All calls are noted in the call log.
Also refer to
<numeric> Allocate a number of Call log spaces from a system-wide
pool of spaces to the telephone. Also refer to
space for the system" on page
<read-only> Indicate the total amount of space available for call logging
on the system.
<button> Reset the password for the call log if users forget their
password.
None This feature allows you to define a telephone number that
automatically dials when you lift the handset or press the
Internal
Handsfree button, on a telephone.
External
"Call log" on page 214.
214.
"Setting call log